One thing to keep in mind is that the gear ratio calculator is not always 100% accurate. It is a best guess as to diameter based on the tire size designation. Tires with the same designation can actually vary quite a bit when measured and I've seen differences as much as 5% between different tires of the same "size". Even tires listed as 35" can vary +/- ½".
The first place to look is the tire manufacturer's website and see if they list a "rev per mile" value. If they do, take this value and divide it into 1609344 (ie. 1609344/rev per mile). This will give you the tire size in mm.
The next best thing is to park the truck on a long, flat surface. Mark the ground and the tire where it touches the ground. Roll the tire forward (or backward) 3 rotations and mark the ground again. Measure the distance and divide by 3. This gives a really accurate tire size value. If using inches, remember to convert to mm by multiplying by 25.4.
Hope this helps.
__________________
Bill Cohron - The Mad Doctor  
Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110
www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!
Bring back  Windows™ XP and 7. 
Windows™ Vista and Windows™ 8 is a pain in my a$$! 
Windows™ 10 is only slightly less annoying! 
Windows™ 11 is garbage! 
Much to my surprise, I'm actually quite enjoying Linux! 
|