First, what is your operating system? If it's Windows XP, you're good to proceed. If it's 32-bit Vista, you have to disable the UAC (the Pegasus manual tells you how to do this). Finally, if you are using 64-bit Vista, find a different computer. Bill's working on a fix, but it's not in place yet.
Now, assuming Pegasus works, make sure it's the current version! Go to Updates->Pegasus Update Manager. If it finds an update, click on Updates->Apply Updates. The current firmware version is 2.01.0575 as I write this.
If you are up to date, Register Pegasus! Click on Help->Registration and fill in all the details!
Then, with your Gryphon set back to Level 0, plug it in to the computer. If it connects properly, you'll see that it is "connected" and you'll see your Gryphon's serial number in the lower right corner of the Pegasus Status bar. Click on Updates->Targeted Functions.
If it finds the tune files let Pegasus apply them and when it is finished, simply unplug the Gryphon and take it to your truck.
(And JWBFX4) was quicker than me!)
- Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
|