|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, February 9th, 2010, 03:11 PM
|
||||
|
||||
"Shifting on the Fly"
Can you really change tunes with a flip of the switch while driving?
 Also can I just remove the chip to change tunes with out removing anything else ... I cut a "hinge" in the plastic cover for access ... TAKE THE KEY OUT and what else should I know?  So So SO SO impressive ... Words cannot say how impressed I am on how major my truck has changed for the better  
__________________
2000 F350 Larait CC LB 4x4 Dually 1969 Bronco Rock Crawler 
|
|
#2
Tue, February 9th, 2010, 05:14 PM
|
||||
|
||||
Yes,
Just flip the indicator to change tunes. But when you do this try to have the motor in a "no load" state. ie Don't do it while accelerating. Just let up off the pedal and switch. If you have a chip burner then alls you need is the chip. Enjoy+have fun!!!! Be Safe!!!!!!!!
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#3
Tue, February 9th, 2010, 05:25 PM
|
||||
|
||||
|
Thanks for the response 88racing
 Let me reword my question When removing the chip from the truck what do I need to know ... Take the key OUT! and what else
__________________
2000 F350 Larait CC LB 4x4 Dually 1969 Bronco Rock Crawler
|
|
#4
Tue, February 9th, 2010, 07:38 PM
|
||||
|
||||
|
Prepared to go back to a mundane slug of a truck......
That's it. The hardest part is taking the switch out too so you can program all of the positions of the chip.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
|
Linear Mode
