![]() |
|
F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have a e99 pcm code FUT4. I have chip and burner.I am geting 250cc single shot injectors. Do I have to reflash my pcm or do I just get new tunes Thankes Scott Brofford 614-581-1582
|
#2
|
||||
|
||||
![]()
if your getting different injectors, new tunes should be just what the doctor orders/
__________________
brad@phptune.com looking foward to hearing from and helping all of you. Brad Scott PHP |
#3
|
|||
|
|||
![]()
I read in a post a long time ago that the e99 pcm was differnt. I think cody had said pcm need reflased that is why I posted for cody because if I have to send my pcm in I am going to have longer down time and I need to make other plans
|
#4
|
||||
|
||||
![]()
sorry for the response then...I should have not posted in a thread not addressed to me..let us wait on cody
__________________
brad@phptune.com looking foward to hearing from and helping all of you. Brad Scott PHP |
#5
|
||||
|
||||
![]()
No sweat, Brad.
Scott, New tunes for the injectors are all you will need. The only reason to reflash the PCM would be to allow you to drive your truck and maintain your sanity while driving without the chip if you needed a reburn at some point. Since you already have the FU package, it will be easy and quick to change your tunes in the event that you need something done to them for fine tuning. No reflash is necessary at that point because your actual down time for tune upgrades (if needed) will be minimized.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#6
|
|||
|
|||
![]()
that is what I needed to know be talking to you soon Scott Brofford
|
|
|