|
Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
TIP: Switch mounting like a clock
In order to be able to quickly tell which position my chip is on, I oriented it like a clock - turns out that the angle between positions comes out almost exactly right:
Position 1: Position 2: Position 3: Position 4: Position 5: Position 6: |
#2
|
|||
|
|||
Very nice. Simple and accurate.
|
#3
|
|||
|
|||
OK, so just to confirm, to get to position 1 on the 6 position chip, i just wind the knob counter clockwise until it will not go any further, and that is position one (1). every click to the right (clockwise) brings it to a new position.
I just wanted to make sure i was using the right settings, and it wasnt the reverse. Thanks from a newb |
Thread Tools | |
Display Modes | |
|
|