|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, February 16th, 2012, 12:54 PM
|
||||
|
||||
PLEASE READ>>RE: Give us your HEX code, 3.0 update, 3.0 update waiting for tunes
When entering your info into the following sub forums>>>Give us your Hex code, 3.0 update, 3.0 update waiting for tunes
1. USE YOUR REAL NAME AS THE THREAD TITLE!!! THE NAME YOU ORDER WITH MUST MATCH YOUR THREAD TITLE AND YOUR USER CP PROFILE!!! There is exceptions to this but they must be worked out with PHP! 2. Hex/calibration/ecm codes are required>>>this depends on the programmer and truck application. 3. INVOICE AND/OR ORDER REFERENCE NUMBER 4. EMAIL ADDRESS 5. Serial number of the device 6. Fill out your user cp profile with all this info.... FYI....PHP and us moderators are the ONLY ONES who can see your info!!! Thank-you and Take Care.....
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. Last edited by 88Racing; Thu, February 16th, 2012 at 06:47 PM. |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
