|
2003 to 2007 6.0L Power Stroke Diesel 6.0L Power Stroke Diesel equipped Super Duty and Excursion. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
FICM/ECM Rollback Passes Final Test (Cold Start)
Went out to start my 04 the other day when it was -5 F all night and only 0 when I fired up my truck to see how it would start without any inductive heating and not being plugged in just to make sure it would. To my surprise it starts better now with no IH than with the old death IH strategy I had previously. I let it warm up until the high idle kicked in (3 min) and down the road I went nice and easy as always until it warmed up. Gone is the jumpy clanking idle, the big flat spot off idle, the shifting is way nicer, and its alot quieter when cold. Before it sounded like all the rod bearings were gone when it was cold. Another thing good is it's still getting 16+ mpg in the cold when it usually was down to about 14 by now with mixed driving.
__________________
2004 F-350 XLT 6.0 Diesel 4X4 04/04 Build PHP FICM & Rolled Back ECM/TCM |
#2
|
||||
|
||||
That's awesome news!
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying! Windows™ 11 is garbage! Much to my surprise, I'm actually quite enjoying Linux! |
#3
|
||||
|
||||
still debating on IH strategy. not sure if Bill will be putting this on when he does my reprogramming.
i never had a cold start issue before i had IH(dealer reflash). about a year after they reflashed with IH strat, i had to replace FICM....
__________________
2004 FORD F250 4x4 CC SB 6.0L AUTO.... Tuned by PHP.... SCT-X3.... Mbrp duals....and more.... |
#4
|
|||
|
|||
Same happend to me but in less time, I lost FICM in a couple of months and 2 injectors. Sence I have replaced all injectors. Good thing I found PHP and am currently going through some reprogramming with Bill. I have completed the FICM non-inductive program and have no trouble with cold starts.
PS It is cold in Candada right now. Can't wait to get back home, MT. |
#5
|
|||
|
|||
I agree! We just had the roll backs performed on 2 of our rucks (03 excursion, 04 F350) and they havent run this good in a long time!!! WORTH EVERY PENNY AND TIME SPENT!! THANKS BILL!!
|
|
|