Building an engine run stand.

[cleatus12r]

This will be an ongoing thread for the next couple of weekends as I am tired of starting these things almost literally on the floor. My dad made a cart at the beginning of recorded history and I decided to build a new one out of some scrap around the shop from other projects. I'll attach pictures as I take them and load them. The first batch should be tonight and then I'll have a few more hours in it tomorrow. His works but it's no more than a small wheeled cart which has two angled perches that the engine just sits on with a flat spot for the bellhousing to rest. No radiator attachment, no gauges, etc.

The initial build is for a 390 and then I'll build mounts for a hot little 351W I'll be putting together for a friend's derby car.

[cleatus12r]

Here are a couple pictures of this weekend's progress. I've gotten to a stopping point without gauges, fuel cell, and motivation.


I have an MSD 6A and coil as well as a 2V Holley Pro-Jection that I've had since 1998 that will go on this as a permanent fixture. Not that I really need that stuff on here, but it's doing as much good sitting on a shelf in the shop as it would do on this stand.

[Power Hungry]

Pretty nice looking.

Suggestion... I'd make the back end height adjustable. Sleeved box with set bolt. That also would allow for different bellhousing/mounting options by making a new upper section. This also helps when setting the angle of the engine so that the carb is level.

I'm sure you going to put some large casters on it. It's nice to be able to roll that sucker out of the way.

Here's a couple videos of the 289 on the Easy Run engine stand. After looking at what all the materials and components would cost, I decided it would just be easier to buy one that to build one from scratch. As much fun as it is to fabricate stuff, it really comes down to available time to actually get anything accomplished.

Anyway, enjoy.

1) 2)

3) 4)

[cleatus12r]

I've watched your videos numerous times. Do you still have that engine?

I thought about buying a pre-made stand but.....well.....$$$$ really didn't trump my time and spare metal. Also, Fords need a bellhousing attached anyway for starter mounting and this will just run Fords so the bellhousing to transmission bolts will always be in the same spot (again, just stuff laying around - bellhousings galore around here) so I figured I'd only need the adjustable engine mount perches.

I have a fuel cell coming and a few gauges on the way.


Yes, big casters on the way too. I only have it on stands right now so I can work comfortably at chest height.

I'm into it a day and a half and about $210 so far not counting the scrap metal and 22 year old ignition/fuel injection parts.

[Power Hungry]

Originally Posted by cleatus12r

I've watched your videos numerous times. Do you still have that engine?

I thought about buying a pre-made stand but.....well.....$$$$ really didn't trump my time and spare metal. Also, Fords need a bellhousing attached anyway for starter mounting and this will just run Fords so the bellhousing to transmission bolts will always be in the same spot (again, just stuff laying around - bellhousings galore around here) so I figured I'd only need the adjustable engine mount perches.

I have a fuel cell coming and a few gauges on the way.


Yes, big casters on the way too. I only have it on stands right now so I can work comfortably at chest height.

I'm into it a day and a half and about $210 so far not counting the scrap metal and 22 year old ignition/fuel injection parts.

Yeah, that's where it's handing having a scrap pile to pull from. I don't really have that luxury, so I'd end up with a fortune just in steel alone.

To answer your question, yes... I still have that engine. It's supposed to go into the Fairlane, but I have so little time to play with the car. I'm kinda looking for roller that's in a little better shape than the one I have. There's enough stuff to choose from around here, but I'm pretty picky and haven't found just the right deal.

I'd put it in the Bronco, but a 289 just isn't going to be torquey enough to really get it going and I know I won't be happy with it. Something smaller and lighter would be a good fit for the 289. Another Fairlane that isn't quite so rusted out, or maybe a Falcon. I'm not super big on Mustangs, and they're pricey as hell as it is. Out there somewhere, I'm sure there's just the ticket for me.

Anyway, interested in watching this project come along.

[cleatus12r]

Originally Posted by Power Hungry

Yeah, that's where it's handing having a scrap pile to pull from. I don't really have that luxury, so I'd end up with a fortune just in steel alone.

To answer your question, yes... I still have that engine. It's supposed to go into the Fairlane, but I have so little time to play with the car. I'm kinda looking for roller that's in a little better shape than the one I have. There's enough stuff to choose from around here, but I'm pretty picky and haven't found just the right deal.

I'd put it in the Bronco, but a 289 just isn't going to be torquey enough to really get it going and I know I won't be happy with it. Something smaller and lighter would be a good fit for the 289. Another Fairlane that isn't quite so rusted out, or maybe a Falcon. I'm not super big on Mustangs, and they're pricey as hell as it is. Out there somewhere, I'm sure there's just the ticket for me.

Anyway, interested in watching this project come along.

I've always thought that the small blocks would be perfect for a Ranger or Pinto. The bigger cars and pickups need a little more than a short stroke V8 to feel like they have ample oomph. Mustangs aren't my cup-o-tea either. My ex had a 72 Torino GT and I always loved that car....I guess I'm into the full frame stuff. It was a 351C car (never been a 335 series fan) so I had plans for a 429 and we know how that worked out. Want a Crown Vic?



I guess I've always been spoiled with just "having stuff laying around". I get my parts-hoarding tendencies from my dad and a lot of the stuff here is from trading/labor on things he and I have worked on over the years. I also have room for it and don't have to pay for storage so that helps.