|
|
|||||||
| Latest News Stay up to date with what's going on. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, December 23rd, 2009, 06:18 PM
|
||||
|
||||
|
STATE INSPECTION ADVISORY FOR GRYPHON/EDGE OWNERS
Recent threads and posts are indicating that some of your trucks are going in for state inspections.
If you do the following you'll have a better chance at passing. 1. There should be no need to put the truck back to stock level 0. 2. Simply unplug and remove programmer and cable and go to test station. If the above aren't followed and you put your truck back to stock level 0 you'll get a p1000 code and won't pass. If you think you need to have the truck tested with stock programming than do it a week before and drive at least 50 miles before going to the test station. P1000 FAQ Link: http://forum.gopowerhungry.com/faq.p...50_drive_cycle Thank you Have a Good One! Last edited by 88Racing; Thu, December 24th, 2009 at 10:54 AM. 
|
|
#2
Tue, March 9th, 2010, 11:23 AM
|
|||
|
|||
eagle1
What state or states are we talkin about?
|
|
#3
Tue, March 9th, 2010, 11:55 AM
|
||||
|
||||
|
Quote:
__________________
"Good judgement comes from experience. Experience comes from bad judgement." - Colin Powell to new batch of 2LTs (while serving as V Corps Commander)  Factory manuals here: http://www.motorcraftservice.com
|
|
#4
Tue, March 9th, 2010, 12:40 PM
|
||||
|
||||
|
If your State or locality (in Arizona we have two "localities" - Tucson and Phoenix) requires an emissions inspection, you'll know about it. If you've never heard of this inspection, I doubt it's required where you live.
I wonder if I'm the only one who doesn't seem to get the P1000 code when I switch back to stock though? I ALWAYS put the truck back to stock whenever I take it in for service, even an oil change, and I've NEVER seen the P1000 (or any other code). - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
|
|
#5
Tue, March 9th, 2010, 01:24 PM
|
||||
|
||||
|
Come to think about it now?
I don't think I have ever seen it pop up when I go back to stock either. Hmmmmm........ Interesting. 
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#7
Mon, October 8th, 2012, 04:15 PM
|
|||
|
|||
|
Hounddawg007
I live in California, and I had a similar problem with stock Edge program. I was running a little lean due to other mods, so I cleared codes and went to stock. When i went to test station they saw I had cleared codes so that would be an automatic failure for smog. I had to put over 100 miles on truck to get this to clear from computer.
|
|
|
|
Hybrid Mode
