|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, May 10th, 2012, 11:46 AM
|
||||
|
||||
Options
I have an Edge Evolution (Original one).
I would like to reprogram the ECM back to a perferred stradgy (currently ECM: VXAP2N2.HEX and PCM: TQAU0N3.HEX) Also looking into FICM tune would like to go with Hercules or Atlas 80. I Tow a Travel Trailer that is 8,000lbs dry weight (up to 10,000lbs Fully loaded). Wondering if either of those are reccomended or if EGTs will be too high when towing? Also I can do all of this through my Programer correct? 
|
|
#2
Fri, May 11th, 2012, 08:24 PM
|
||||
|
||||
Yes your evolution can do all of those functions once its changed to a gryphon. However, I has to be changed between the rollback module and the ficm programer by Bill...remotely. It won't be both at the same time.
I'd recommend the Atlas 40 vs the A80 just because of the weight of your trailer. But thats just my preference.
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed Last edited by Jeremy; Sun, May 13th, 2012 at 09:37 PM.
|
|
#3
Wed, May 16th, 2012, 10:53 PM
|
||||
|
||||
|
Well I just submitted my order form for the Atlas 40 and the PCM roll back.
I can't wait. Planning on getting a custom tune too for the Evo. Any known problems with the 140 Extreme tune on stock head bolts  (Figure I will wait until they go to upgrade)?
__________________
2004 F250 6.0L S-Cab Long Bed, 4" exhaust, Edge Evo, Blue Spring, EGR Delete, PMM Coolant filter, Smoked LED lights in rear, Smoked cab lights, 3" Lift , 18" DC-2's with 275/70R18 Nitto Terra Grapplers, Warn Manual Hubs, Rhino Liner
|
|
#4
Fri, May 18th, 2012, 03:45 PM
|
||||
|
||||
|
I was talking about the custom tune for my edge evolution not the FICM tune.
__________________
2004 F250 6.0L S-Cab Long Bed, 4" exhaust, Edge Evo, Blue Spring, EGR Delete, PMM Coolant filter, Smoked LED lights in rear, Smoked cab lights, 3" Lift , 18" DC-2's with 275/70R18 Nitto Terra Grapplers, Warn Manual Hubs, Rhino Liner
|
|
#5
Tue, May 22nd, 2012, 11:15 PM
|
|||
|
|||
|
OK really confused. I thought the CTS could not program the ficm or rollback the ECM. At least that is what one of the moderators had told me here on the forum. I thought I was going to have to either buy a separate programmer or get a rented one from PHP.
So, let me get this straight. I can order the FICM reprogram, the ECM rollback and custom tunes all at the same time and use them with my CTS and no other hardware. All I have to do is coordinate with Bill about getting it changed between the FICM programmer and the ECM rollback. The whole time though it will run custom tunes as well?
|
|
#6
Tue, May 22nd, 2012, 11:27 PM
|
||||
|
||||
|
Quote:
__________________
2004 F250 6.0L S-Cab Long Bed, 4" exhaust, Edge Evo, Blue Spring, EGR Delete, PMM Coolant filter, Smoked LED lights in rear, Smoked cab lights, 3" Lift , 18" DC-2's with 275/70R18 Nitto Terra Grapplers, Warn Manual Hubs, Rhino Liner
|
|
|
|
Hybrid Mode
