Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 2004 to 2008 F-150 and Mark-LT

2004 to 2008 F-150 and Mark-LT
4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs.


Reply
 
Thread Tools Display Modes
  #1  
Old Sat, July 14th, 2012, 07:54 AM
charlie9092000 charlie9092000 is offline
Whopper
 
Join Date: Apr 2011
Location: Moline IL
Posts: 7
charlie9092000 is on a distinguished road
Default "tranny shudder" at 45-50 miles per hour

I am getting "tranny shudder" at 45-50 miles per hour when using 89 performance mode, it doesn’t do it when at stock or when the custom 89 tow tune is used.

I have 2005 5.4

The invoice # is 4469 invoice date is 5/4/2011
Hex RXCM5E4

Any help would be great .


Charlie
Reply With Quote
  #2  
Old Sat, July 14th, 2012, 03:34 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

If you have the monochrome gryphon try raising the torque converter lock/unlock points.
__________________
Reply With Quote
  #3  
Old Mon, July 16th, 2012, 01:36 AM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Quote:
Originally Posted by Longshot270 View Post
If you have the monochrome gryphon try raising the torque converter lock/unlock points.
He could do this with the CS/CTS platform too, Longshot.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
Reply With Quote
  #4  
Old Mon, July 16th, 2012, 07:56 AM
charlie9092000 charlie9092000 is offline
Whopper
 
Join Date: Apr 2011
Location: Moline IL
Posts: 7
charlie9092000 is on a distinguished road
Default

I have the monochrome gryphon , any suggestions on the values that I need to enter? Should I copy the values that the tow mode is using?
Reply With Quote
  #5  
Old Mon, July 16th, 2012, 08:52 AM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

In the custom tuning options you'll find torque converter lock points. These are speed and throttle based events that when the vehicle reaches the point the torque converter locks or unlocks. Your vehicle is currently sitting in a grey area where it can't make up its mind. Go to that setting in the custom options menu and raise both the locking point and the unlocking point by one and give it a drive. Keep raising it until the shudder goes away.


The tow tune will most likely show 0 for the locking/unlocking points because these settings are a change from the baseline.
__________________
Reply With Quote
  #6  
Old Fri, August 10th, 2012, 05:28 PM
charlie9092000 charlie9092000 is offline
Whopper
 
Join Date: Apr 2011
Location: Moline IL
Posts: 7
charlie9092000 is on a distinguished road
Default Thanks for your help

I raised both the locking point and the unlocking point by two and that fixed the issue.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:48 PM.


All Contents Copyright 2008-2024, Power Hungry Performance