Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software
Reload this Page Difference between PMT1 and PMT3
Register FAQ Calendar

Minotaur Automotive Tuning Software
Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners

Reply
Page 2 of 4 1 2 34
 
Thread Tools Display Modes
  #11  
Old Wed, January 20th, 2010, 02:02 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,657
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Actually you don't need any software. You attach the emulator adapter to the PCM (where the chip goes), hook up the emulator (via serial/usb adapter), go up to the "Romulator" tab in Minotaur, select a COM port, and hit connect. Then you download the 32K file you made, and start the truck. You will need the emulator definition though and Bill didn't charge me for mine since it's basically the same as your existing definition but it's made to work with the emulator.

You can select a box that says "real time update", which changes stuff on the fly or you can make some changes and hit "download" again and download the changes to the emulator. The engine will die when you do this and will require a restart.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #12  
Old Wed, January 20th, 2010, 02:03 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Ohh... and after you are satisfied with your program, do you have to convert it back to 224K to load it on the chip? How does this work?
Reply With Quote
  #13  
Old Wed, January 20th, 2010, 02:06 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Quote:
Originally Posted by cleatus12r View Post
Actually you don't need any software. You attach the emulator adapter to the PCM (where the chip goes), hook up the emulator (via serial/usb adapter), go up to the "Romulator" tab in Minotaur, select a COM port, and hit connect. Then you download the 32K file you made, and start the truck. You will need the emulator definition though and Bill didn't charge me for mine since it's basically the same as your existing definition but it's made to work with the emulator.

You can select a box that says "real time update", which changes stuff on the fly or you can make some changes and hit "download" again and download the changes to the emulator. The engine will die when you do this and will require a restart.
Ok, how about the HEX WORKSHOP program, included or seperate?
Reply With Quote
  #14  
Old Wed, January 20th, 2010, 02:17 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,657
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Download off the internet. Free.

Yep, just paste the modified 32K binary into the 224K file and VOILA!!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #15  
Old Wed, January 20th, 2010, 02:22 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Nice! Well I thought texting while driving was hard, this should take it to another level.
Reply With Quote
  #16  
Old Wed, January 20th, 2010, 06:55 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
I just realized since you cannot change any of the "functions" that shift schedule adjustment is out.


DANG!
Reply With Quote
  #17  
Old Thu, January 21st, 2010, 12:14 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,657
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Oh, my bad, Dave. Yes, the shift scheduling is adjustable. I had a brain fart.

Adjust to your heart's content.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #18  
Old Thu, January 21st, 2010, 01:35 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
SWEET!
Reply With Quote
  #19  
Old Sat, January 23rd, 2010, 07:17 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Quote:
Then you simply select the 32768 bytes that you need (address E000 to 16000) and paste them into a new sheet, save it, and load it into the emulator definition.

Am I looking at the right thing here.....










This computer stuff is crazy.
Reply With Quote
  #20  
Old Sat, January 23rd, 2010, 08:43 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,657
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Yeah. That's it.

What you need to do is delete the first 57344 bytes. Use the "edit" and "select block". Then with the selector in "dec", type in 57344 and hit "ok". Delete that block. You should start with a hex value of "27FE".

Select another block of 32768 bytes and copy that to a new hex editing window.

There's your emulation binary!


When you go back in after changing, use the original 224K binary and insert the modified 32768 bytes into the 224K program.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
Reply
Page 2 of 4 1 2 34

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:19 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance