Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)

Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip.

If you have any other questions or comments about the Phoenix/TS chip, please post it here.


 
 
Thread Tools Display Modes
  #1  
Old Thu, March 1st, 2012, 07:29 PM
Dieselcat Dieselcat is offline
Whopper
 
Join Date: Feb 2012
Posts: 12
Dieselcat is on a distinguished road
Default Shifting hard?

My truck has a jw valve body I noted that when ordering my chip.
When my truck goes from 2nd to 3rd it shifts alittle hard, nothing
Bad just noticeable. Is this normal? No matter how soft or hard I take
Off its the same. If this is normal with a chip I understand.
  #2  
Old Thu, March 1st, 2012, 09:32 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,658
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

The problem is that even though the shifting functions are returned to stock when a customer states that they have a valve body change (either the entire valve body or a "shift kit"), it's possible that the shifts may still be a bit firm. Every valve body is going to cause a different reaction and we do what we can, but variances will always be present (to what degree, nobody knows until everything's done).
  #3  
Old Fri, March 2nd, 2012, 02:01 AM
Dieselcat Dieselcat is offline
Whopper
 
Join Date: Feb 2012
Posts: 12
Dieselcat is on a distinguished road
Default

Thanks for the info. I know I have to have my chip reburned
Later when I get my stage 1 injectors, is thier a way that
When they area doing the reburned they can smooth out that
One shift point ?
  #4  
Old Fri, March 2nd, 2012, 12:03 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,658
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Absolutely!
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:17 PM.


All Contents Copyright 2008-2024, Power Hungry Performance