Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old Sun, December 13th, 2009, 11:49 AM
antzfreshwhip antzfreshwhip is offline
Whopper
 
Join Date: Oct 2009
Location: Eaststroudsburg,pa
Posts: 21
antzfreshwhip is on a distinguished road
Default

i noticed my wot 1-2 goes way above 5400. prob about 6000. so im gonna lower it too 5100 and raise the rev limiter to 5500. it scares me when it shift at that high of a rev.

and the idle i wanted to raise to about 700 rpms, i monitored the batt voltage and idle rpms, and noticed the voltage would go as low as 12v with a 515 rpm.. it usually hovers around 600rpm/ 14 v when the truck is in park with no load on the engine
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:25 PM.


All Contents Copyright 2008-2024, Power Hungry Performance