|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#7
Mon, December 14th, 2009, 08:40 PM
|
||||
|
||||
I had the switch rotated 180*. So all the selections were blank, pos 7-12. I started at pos 7, not pos 1 and turned all the way to 12, not pos 6, with no change in engine sound. Once I turned the truck off and rotated the switch, it worked. Pos 1 is stock, 2 is whisper, so when I started the truck and turned it to pos 2 it got quieter so I knew it was the switch positioning. But still it shouldn't have started?
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode