Quote:
Originally Posted by 907dave
Do you have a good way to check fuel pressure?
I would be curious to see what the pressure actually is in the head.
You can pull the 1/8" plug from the rear of the driver side head, and screw in a gauge to monitor this.
Its possible that the check valve/ screen/ vibra-lok fitting at the end of the fuel line that feeds the head is restricted.
|
I am running AE Scanner - Ford ProLine Pack. Can't I check it with that system? At least at the Fuel Filter I know I have 79 to 81 psi, that is what the return spring is set to.
How high does the gauge need to read, if I put it on the back of the head?
__________________
Thank you and have a great day, Troy Detweiler
I have a '99 F 250 7.3L Diesel w/ a 6 speed Tranny and 4x4.
Mods: Amsoil dual bypass oil filters, Amsoil air intake mod DIY, fuel preasure spring mod(70psi), FU Chip and Burner , 3.73 rear gears, leveling kit (DIY), Stabilizer bars on the rear axle (DIY).
'02 F 350 7.3L, 6spd,4x4,CC, Dually- Just bought 4-15-11
|
Sun, November 28th, 2010, 07:36 AM
Threaded Mode