|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Mon, February 21st, 2011, 02:32 PM
|
||||
|
||||
Engine cuts out when changing switch
I have had my PHP Phoenix since August, it was installed by Cody. No problems at all until yesterday. I had started truck and was letting it idle to worm up. I had switch set on 80DD, which is the #4 possition. Was showing my wife what was waht on the switch and when I went from #4 possition down to #3, which is towing, the engine cut out for just a fraction of a second
 . Tried some of the others and there was no problem. But from #4 to #3 it cut out 5 out of ten times . She had truck all day and in it again today so I have not got to try it "On-The-Fly". What could be going on?  Late 99 F350 7.3L
__________________
Thanks, Bobby 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode