No start... Need advice
I installed my chip. At first it started fine but the chip didn't work. I removed it all and cleaned the contacts some more. After that it wouldn't start. Cleaned it a little bit more and it started for a few seconds then died. If I unplug the chip the truck runs fine and starts right up. I used a brass brush and some emery cloth to clean it. Mine had a lot of silicone on it. Do y'all think that I could be that it's just not making food contact?
Stupid is as stupid does.
__________________
02 f250, 7.3,4r100 rebuilt at 140k with shift kit and triple disc. Dana 60, 2.5" zone leveling kit, 16x10s, 315/75r/16
Autoenginuity in the Lafayette,La area 
|
Thu, January 12th, 2012, 11:05 PM
Threaded Mode