|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
|
|
Thread Tools | Display Modes |
|
#5
Tue, May 22nd, 2012, 10:15 PM
|
|||
|
|||
OK really confused. I thought the CTS could not program the ficm or rollback the ECM. At least that is what one of the moderators had told me here on the forum. I thought I was going to have to either buy a separate programmer or get a rented one from PHP.
So, let me get this straight. I can order the FICM reprogram, the ECM rollback and custom tunes all at the same time and use them with my CTS and no other hardware. All I have to do is coordinate with Bill about getting it changed between the FICM programmer and the ECM rollback. The whole time though it will run custom tunes as well? 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode