|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
|
|
Thread Tools | Display Modes |
|
#2
Mon, October 12th, 2009, 12:38 AM
|
||||
|
||||
Under "Parameters"
"Converter test switch" Change to "1" "Converter Duty Cycle test value" to "100%" "Transmission Test Gear Select" to "4" "Transmission Test Switch" to "1" These two will be the most important because they will lock the torque converter clutch and hold the transmission in 4th gear. Obviously, you'll want to put it in this program only when ready to hit the green button and go full-on.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
|
Threaded Mode