|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Mon, February 28th, 2011, 09:14 PM
|
|||
|
|||
very Happy
I just got my chip installed on friday i ordered
40t 65t 80 dd 100 per 120 race im very happy with how it runs i havent used the tow setting yet. Tomorrow im going to put the tow to the test. the 100 and 120 both surge so i have to figure that out.. The only problem i had was with the switch. I mounted it in the dash put the knob on and when i would turn it, The knob would start to get harder to turn untill it tried to trun the switch itself. I made a phone call and found out as you turn the knob it goes in slightly so i had the knob in to far so what i did was turn the switch to the highest setting all the way to the right then installed the knob.. Thanks for helping me today, One very happy customer 
__________________
02 f-250 supercab 4x4 . Pyro,boost,trans temp guages,6637 intake 4 inch exhaust, 40t,65t,80dd,100p,120R and J/W valve body. |
|
|
Threaded Mode