|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#8
Sat, April 28th, 2012, 03:14 AM
|
||||
|
||||
I've checked the tune and there is nothing in it that affects CAT, EVAP, or EGR, so if the system monitors are not clearing then there is actually a problem with the systems or you simply have not completed a proper drive cycle to reset all the monitors.
Please be sure to read this FAQ on the proper conditions for system monitor reset. It may help. Power Hungry Performance Forum - FAQ: Ford F150 FAQs You probably won't have access to the necessary scan-tool, but just do the best you can. The critical conditions are fuel level and engine temp. They must be followed pretty strictly or you're going to end up fighting the monitors. Let me know if there's anything further we can help with.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode