|
|
|||||||
| The Conversation Pit This is where EVERYTHING else goes. No subject is too mundane. How's the weather in your area? Did your kid cut his first tooth? Really, what do you think about the President? And don't get me started on Cummins and Duramaxes. Have at it! |
|
|
Thread Tools | Display Modes |
|
#1
Fri, March 4th, 2022, 06:09 PM
|
||||
|
||||
How do people get away with this kind of butchery and not die?
Went to the salvage yard today. There is never anything old at this place and early 90's are usually the limit.
My eyes were drawn to a 77-79 F150 that had been rolled....just because a 40 year old pickup in THIS YARD was a unicorn. I'll let these pictures speak for themselves but what you're looking at is: Rear hubs from a 99-02 F250/F350 WELDED to the front 5-lug hubs on the pickup. Pipe used as coil spring spacers. Track bar mount welded to the frame (poorly). Thin wall square tubing as a steering draglink. Rear u-bolts welded to the spring plate and holding 3 blocks together.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
|
Threaded Mode