Unable to download custom tunes

[bart_r6]

I have the same exact issue. I tried a few times but no luck.
I'll need Bills help also.
Thanks, BART

[Jackpine]

Originally Posted by bart_r6

I have the same exact issue. I tried a few times but no luck.
I'll need Bills help also.
Thanks, BART

Bart, you're going to have to be more helpful. Please go to the UserCP and enter all your personal information: full name, programmer serial number, model number, hex code, etc.

Then, download and install Pegasus, click on Help->Registration and fill in all the details there too. That way PHP's server will be able to "talk" to you.

- Jack

[bart_r6]

Thank you. I just finished updating the pegasus...it work ok now.
What do i have to do now to upload the custom tunes from the e-mail to the gryphon? Thanks

[tg150]

Originally Posted by bart_r6

Thank you. I just finished updating the pegasus...it work ok now.
What do i have to do now to upload the custom tunes from the e-mail to the gryphon? Thanks

Using Pegasus to update your hardware.

--------------------------------------------------------------------------------

In order to update your Gryphon, the first thing you need to do is make sure that you have installed the Pegasus Update Client. Here is the download link:

http://www.powerhungryperformance.co...v2_01_0575.exe

You may also want to download the Quick Start Guide at:

http://www.powerhungryperformance.co...user_guide.pdf

Once installed, run the Pegasus application. Always make sure you have the latest software version by going to [Updates] and then [Pegasus Update Manager]. If there are any updates available, you will be notified. If not, then continue on.


To update your Gryphon with CUSTOM files, follow these simple steps:

Make ABSOLUTELY SURE you return the vehicle back to stock before going any further. In most cases an update shouldn't be allowed unless the programmer is back to stock, but some early versions had a firmware bug that may cause the all the data on the unit to be lost when trying to update while still programmed.
Connect the programmer to the USB cable.
From the main Pegasus screen, select [Updates] and then [Targeted Functions] to begin the custom download.
Follow any on-screen prompts to disconnect/reconnect the USB cable. Later versions don't usually do this, but early versions do. Make sure to read all messages before clicking [OK].
Once the update is complete, you may remove the USB cable and return the unit to your vehicle..

[88Racing]

Nice instructions tg150!

I will just add in to make sure the drivers install. That's done it to me a couple of times on vista 32.

Lars

[Jackpine]

Very good, tg150! You're getting almost as "long-winded" as me! Trying to put me out of a job?

Excellent post! I'll add though, make sure your ignition key is ON before you plug the Gryphon back into the OBDII port. (See, I couldn't leave well enough alone, could I?).

- Jack

[tg150]

Originally Posted by JackandJanet

Very good, tg150! You're getting almost as "long-winded" as me! Trying to put me out of a job?

Excellent post! I'll add though, make sure your ignition key is ON before you plug the Gryphon back into the OBDII port. (See, I couldn't leave well enough alone, could I?).

- Jack

Jack, Your a riot..I certainly dont qualify for your job so no worries there Besides.. You and Lars do an excellent job. Just noticed you both weren't online and thought id help the one time that i can actaully contribute instead of askin q's .

[bart_r6]

OK...i think i got it. I put the gryphon back in the truck and went into the programing menu and i saw custom towing and custom perf. tunes....so i think it downloaded correctly.....
I guess i will go for a spin and that should be my confirmation for sure.
Thanks guys

[Jackpine]

Yep, Bart, you're good to go! The changes in the names of the tunes says you have custom ones. Have fun!

- Jack