|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, September 23rd, 2009, 12:41 AM
|
||||
|
||||
Good to see you back up here Jordan!
 Please do what Lars suggested. Your Hex code may be the source of your problems and, if so, Bill might have a quick fix. It DOES sound like a TC problem, especially the way you explain it now and I don't think there's any way this will cause damage. You might try going into Custom Options and changing the TC lock and unlock values by -10 for 4th gear. It won't hurt anything, even if it isn't right. What I'm trying to do is to suppress the tendency of the TC to unlock (then lock back up) while you're at cruise. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#2
Thu, September 24th, 2009, 04:44 PM
|
|||
|
|||
|
will do let me get the hex code off the programmer! I will try the TC change, to see if it does anyhting for me. Thanks the truck has 36,000 btw
__________________
United States Air Force OIF 07 & 09 2007 F150 FX4 SCREW Gryphon Programmer |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
