I'm not Bill, but it DOES sound like a cable problem. The "bridge" is a communications circuit built into that cable. I suspect you need a cable replacement.
However, you could try this: Unplug the cable from the OBDII port. Then, turn the ignition key to ON (don't start) and plug the cable back in. If this clears the problem, you'll at least be able to change tunes. If it doesn't, it won't hurt anything.
I'm sure Bill would appreciate you getting a new cable (if that's the problem) from Edge before you send the unit and the cable to him for the upgrade, but he MAY have an exchange deal with Edge set up too. He'll have to advise you on this.
- Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
|
Tue, October 20th, 2009, 03:22 PM
Threaded Mode