|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#7
Sun, January 18th, 2009, 12:55 PM
|
||||
|
||||
The reason the option doesn't come up is because the unit is not being correctly identified. When the unit is plugged in, does it show "Connected - Type #" in the lower left corner? If not, then either the USB Drivers are not installed correctly or you have a 64 bit OS like XP64 or Vista 64. If you have the standard version of Vista, you may not have disabled the User Account Control (UAC) in the User Account settings.
For more details, please download the installation instructions at: http://www.phptune.com/Downloads/peg...user_guide.pdf This should cover most of the questions. If you are still having problems, give us a call tomorrow and we'll get you up and running. Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode