![]() |
|
Towing This forum is specifically for questions, comments, or ideas about towing with your vehicle. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
We tow a 2008 Jayco Jayflight 26bh. Last season, I towed it with a 2002 F-150 with the 5.4 (2v), and 3.31. Prior to towing, I added a K&N cold air intake, Flowmaster cat-back exhaust, and another company's programmer~sorry, I didn't know any better:sadface: The truck pulled the trailer ok, but I wasn't happy.
I've since upgraded to a 2010 F-150 with the 5.4(3v) 3.55ls and tow package. I am looking forward to adding a Gryphon to my new truck ![]() |
#2
|
||||
|
||||
![]()
I changed out the POS Pintle hitch to a 2 5/16 ball hitch and removed the extra channel that was mounted on the ramps and dovetail.. which removed about 300lbs of metal from the rear of the trailer... It tows great now.... I have developed a strong dislike for pintle trailers on light duty vehicles......
Also added a wireless remote control setup for the winch... ![]() ![]() ![]() ![]() ![]()
__________________
DJ Phoenix (my modded) Hi-1200/240Tow/75FS/80DD/100/140SS +Minotaur ASE Master Auto Technician ![]() 2001 Ford Excursion 7.3 4x4 Projects. 1970's Hustler and Max II Amphibious ATV's |
#3
|
||||
|
||||
![]()
Nice work, DJ.
Looks like a skidsteer movin' mamma-jamma now.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#4
|
|||
|
|||
![]() Quote:
Any body know if most controllers have fuses? it seems I've blown out 2 controllers now due to a frayed trailer cable ![]() |
#5
|
|||
|
|||
![]() Quote:
__________________
Full trucker effect ,BTLS.com |
#6
|
||||
|
||||
![]()
Here is a couple pics of 2 recent heavy towing trips from Denver to my home, all done in 40HP tow tune with no issues with EGT's or tranny temps, shifts etc
first 2 are about 16K lb trailer weight and the last one is 21K lb trailer weight. 6 pallets of Retaining wall block ![]() ![]() 4 pallets of flagstone, a diesel generator and 3 wheelchair lifts... and a pool table base... ![]()
__________________
DJ Phoenix (my modded) Hi-1200/240Tow/75FS/80DD/100/140SS +Minotaur ASE Master Auto Technician ![]() 2001 Ford Excursion 7.3 4x4 Projects. 1970's Hustler and Max II Amphibious ATV's |
#7
|
||||
|
||||
![]()
Dang, thats quite a load. How far did you have to pull it? Do you have any kind of Weight Distributing Hitch?
__________________
Bob- 2003 F250 Lariat 7.3PSD CC SB FX4 Kwik (6637) Filter, RE 2.5" leveling kit, F350 Rear Blocks, TC Lock, Fumoto, EBPV/Exhaust Brake,6.0 Tranny Cooler, AIH Delete, IssPro EV2 Gauges, PHP Phoenix stock, 25tow, 40tow, 65tow, 80dd, 100perf, In-tank mods, Muffler Delete, WW, FRx,HPx, JW Stage 1 Trans, Swamps HV/HF IDM -Pulling a 38' Forest River Sierra 5th Wheel |
#8
|
||||
|
||||
![]()
North side of Denver to South side of Colorado Springs about 80-90 miles.. 21K was pulled at night in the snow with the oppisite side of the Fwy shut down for the Obama's Motorcade. about 20 miles of the frw was on freshly packed snow...
WD hitches are for Girls ![]()
__________________
DJ Phoenix (my modded) Hi-1200/240Tow/75FS/80DD/100/140SS +Minotaur ASE Master Auto Technician ![]() 2001 Ford Excursion 7.3 4x4 Projects. 1970's Hustler and Max II Amphibious ATV's |
#9
|
||||
|
||||
![]()
Here is mine from last Years opening of the zMax Dragway.
![]() |
#10
|
||||
|
||||
![]()
Nice!
That four wide drag racing they do there is nuts! |
![]() |
Thread Tools | |
Display Modes | |
|
|