|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Sat, November 28th, 2009, 02:46 AM
|
||||
|
||||
Troy,
The tunes are your tunes, they're just mislabeled. I've rebuilt the calibration to correct that problem. As for the vibration, I'll need a better description. However, I just don't know what else to ask you on that. Under hard acceleration, it could be anything. Torque management, axle twist, misfire. Hard to say. I made a minor change to the 91 program to eliminate the possibility of lean misfire. If it goes then great. If not, then I'd almost say it's something driveline related and the power output is causing some kind of binding. Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#2
Mon, November 30th, 2009, 11:01 AM
|
|||
|
|||
|
thanks for the reply guys. ok about the tune labeling. about the vibration, i it's just an ever so slight vibration that i get. at first, i did think it was driveline related but when i switch over from my #3 tune to the others i dont get any vibration. i also remember seeing this thread on f150online(dot)com and it sounds like what's happening to me...
http://www.f150online.com/forums/chi...vibration.html |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
