why 6 positions?

[cleatus12r]

Not possible. You can only install one chip at a time. Besides, "stock" on a chip is not "straight-from-the-PCM-stock". Stock on a chip is a burned position and still bypasses the PCM's internal memory.

You could, however, buy two chips and switch back and forth between the two. I haven't looked to see what kind of truck you have, but switching chips in a 95-97 isn't the easiest thing to do in a hurry, but it could be done. That way, you'd have a total of 11 tunes plus a "stock".

[nelstone74]

I know it wouldn't work I have seen how the hardware works, besides inmy truck there isn't enough mods to really use more than 6 spots,

But justt think a whole little row of mad max knobs on the dash you could turn to dial in the performance. I would have to add a couple of rows of toggles, gauges, and buttons so it would be like I was in a cockpit.

[Power Hungry]

We could certainly set you up with a row of knobs... You could get 8 or 10 for the price of a chip.