ring and pinion

[907DAVE]

Give Randy's Ring and pinion a call, they will hook you up!

Yukon Gear is what we use.

[JWBFX4]

Originally Posted by 907dave

Give Randy's Ring and pinion a call, they will hook you up!

Yukon Gear is what we use.

I was just looking for their name to post it...of course I couldn't remember where I wrote it down. And just to add to it....everyone I have talked to wouldn't use anything other than Yukon gears.

[88Racing]

Here's the link to Randy's:
http://www.ringpinion.com/PartsList....SpotlightID=11

[mxriderae]

and what am looking for is only ring and pinion ?
right guys ?

[88Racing]

You are looking for install kits for both front and rear. Also you are looking for ring and pinions for front and rear.

CALL THEM/
EMAIL THEM
They are the experts and they may need some info like your VIN and/or axle tag numbers.
Phone # and contact info is in the link I provided.

[mxriderae]

thanx a lot guys i emailed them and will be in touch .. Thanx

[Power Hungry]

If you have a 3.73 gear now, a 4.56 gear w/38's will achieve roughly the same RPM per MPH as stock.

If you have a 4.10 gear now, a 5.13 gear w/38's will achieve roughly the same RPM per MPH as stock.

A 4.88 gear w/38's will yield roughly the same RPM per MPH as a 3.96 gear ratio on stock tires, and is probably the best combination of pulling and economy. Of course, economy is a relative term as the mass of the rotating assembly is about to be triple or more. Certainly not good for stop & go driving.