|
|
|||||||
| 1997 to 2003 F-150 4.2L, 4.6L, and 5.4L equipped F-150s. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Sun, January 3rd, 2010, 02:33 AM
|
|||
|
|||
cant make custom tunes on edge
hey all i have an edge and i have a problem. i bought a used edge and when i try to make custom tunes on it it always runs like i have a cam and black smoke comes out my exhaust. i dont change anything that has to do with fuel or anything i just go in and change tire size gear ratio and shift firmness and it still does this. no one on the other forums im on can help me and AZFX4 told me to come ask here so here i am. any1 seen this problem? i have a 2001 with the 5.4
|
|
#2
Sun, January 3rd, 2010, 07:00 AM
|
||||
|
||||
|
Mike,
Could you please fill in the rest of your User Profile so I can better diagnose the problem? I specifically need the model number, serial number, and the HEX Code. You can find this information in the [Diagnostics] -> [Tech Support] -> [Version Info] screen. Also, if you could provide the Firmware and Calibration versions (also on the same screens), that would be helpful. Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#3
Sun, January 3rd, 2010, 02:33 PM
|
|||
|
|||
|
i added what i could so far but im away from my truck at this time and cant get the specifics right away
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
