|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, January 12th, 2010, 01:30 PM
|
||||
|
||||
I will admit at first this EFI stuff is a bit confusing but it takes on a whole different way of thinking of how things work compared to carbs. These motors are not push rod style ones either anymore. They are all computer controlled overhead cam types. The motors are based off of Ford's indy platform motor.
BTW nice 0-60 times.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#2
Tue, January 12th, 2010, 01:49 PM
|
||||
|
||||
|
Thanks for the temps. I'll check it out tonight. I'll be on the highway about 20 miles each way to play cards.
Wasn't sure if the times were good. Don't have anything to compare them to. Just wanted to see the difference. The perf time was with the rears spinning (that never happened before!!!) and I let out of the gas to get it to hook up  .I'm somewhat familiar with EFI also. Tuned a decent amount of Injected bikes also (closed loop) just stopped tuning not to long after they started injecting them. Started feeling like I imagine Bill does, plus I sold bikes and worked at a bike shop for 15 years. Just didn't want to look at them anymore. Didn't even look at the again for about 10 years. Then about 2 years ago, back on a rice burner. I'm ramling again sorry. Thanks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
