|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#2
Wed, February 17th, 2010, 09:38 PM
|
||||
|
||||
Actually, Bob, those traces look a little TOO clean. You may actually have issues with the thickness of the board.
 You need to cut a little bit more of the holder out to the top (left side of the photo) and get rid of the top mounting bolt boss and then you'll be good to go. You only need one bolt holding the PCM holder in place anyway (and the bottom bolt happens to have the metal tab in it). 
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode