|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, March 16th, 2010, 04:26 PM
|
||||
|
||||
Above the harmonic balancer (crank pulley) and off to the passenger side a bit. About 10 o'clock.
It just has one 10mm bolt holding it in place, remove that bolt and with a little light twisting and prying it will pop right out. Be sure to lube the new sensor 0-ring with a drop of oil before installing it. Good Luck |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
