The kd4crs/Power Hungry/Gotts Mod (revisited - and with pictures)

[Longshot270]

Originally Posted by 88Racing

I guess I would steer clear of using anything else besides the fender hole.
Reasoning is mostly to where I live and the weather and debri. I know k+n can handle moisture but I don't think it would be to friendly to the stock panel paper filter. Adding the Y like you guy are doing might be a perfect water in let during rain or snow.
If the tubing intake could be dropped low enough where gravity would help keep the moisture out then that would be a plus.
I know 4.6 has the cylinder shaped filter.
The fender hole is the perfect spot to get away from all this.
Just some thoughts.
Peace!

I thought about the same stuff down here. Except I worry more about dust and dirt getting sucked in. My filter has to be cleaned every 6,000 miles as it it and the ram air would only increase the amount going in. But if you live in a cleaner area it would be good.