Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)
Reload this Page soft shift
Register FAQ Calendar Mark Forums Read

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.

 
 
Thread Tools Display Modes
  #1  
Old Wed, April 21st, 2010, 12:06 PM
danesjewelry danesjewelry is offline
Whopper
  
Join Date: Mar 2010
Location: idabel ,ok.
Posts: 14
danesjewelry is on a distinguished road
Default
i am not worried about fuel economy really ,i would love for the transmission to shift a little more aggressively- firmer (that may mean at a higher rpm)-just a more positive shiftt-(not sliding in gear).the more power i can have witha custom 87 performance tune the better. i hope this helps
  #2  
Old Wed, April 21st, 2010, 03:03 PM
danesjewelry danesjewelry is offline
Whopper
  
Join Date: Mar 2010
Location: idabel ,ok.
Posts: 14
danesjewelry is on a distinguished road
Default
in post #6 Mr Cohron said "i have any update for you, and let me know if thesework better for you". how do i go about getting this update? i am sorry for the trouble.
  #3  
Old Wed, April 21st, 2010, 03:07 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
  
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default
After you return your truck to stock you take it out and plug it into the computer to run pegasus. Then I'm pretty sure you just click "custom file download"
__________________
  #4  
Old Wed, April 21st, 2010, 03:08 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
Quote:
Originally Posted by danesjewelry View Post
in post #6 Mr Cohron said "i have any update for you, and let me know if thesework better for you". how do i go about getting this update? i am sorry for the trouble.
You make sure you have the latest version of Pegasus running on your computer. Set your truck back to stock and then bring your Gryphon to your PC and plug it in. Once Pegasus reports the Gryphon is connected, hit [Updates]->[Custom File Download].

Once the download and install completes, take your Gryphon back to your truck and load the new tune.

- Jack
  #5  
Old Wed, April 21st, 2010, 06:17 PM
danesjewelry danesjewelry is offline
Whopper
  
Join Date: Mar 2010
Location: idabel ,ok.
Posts: 14
danesjewelry is on a distinguished road
Default PLEASE HELP
i thought i did everything right &when i plugged it in to my truck it said error 150 call tech support --- now what?
  #6  
Old Wed, April 21st, 2010, 06:28 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
Quote:
Originally Posted by danesjewelry View Post
i thought i did everything right &when i plugged it in to my truck it said error 150 call tech support --- now what?
Is it possible that the ignition key was in the OFF position when you plugged the Gryphon back in to your truck? If so, the unit could not "boot" properly.

The solution is simple if this is the case. With the key ON (engine not running), disconnect the OBDII cable from below the dash, and then reconnect. If the PCM's calibration (HEX) code displays, the problem should be resolved and you should be able to load your revised tunes. If not, let us know.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
  #7  
Old Wed, April 21st, 2010, 06:38 PM
danesjewelry danesjewelry is offline
Whopper
  
Join Date: Mar 2010
Location: idabel ,ok.
Posts: 14
danesjewelry is on a distinguished road
Default
i tried that and nothing changed.it says pcm is not responding. please help
  #8  
Old Wed, April 21st, 2010, 06:46 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
Quote:
Originally Posted by danesjewelry View Post
i tried that and nothing changed.it says pcm is not responding. please help
OK, I'll try to attract Bill's attention to this.

- Jack
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:50 AM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance