|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, May 25th, 2010, 10:29 PM
|
||||
|
||||
What truck do you have?
And from what I have seen(im just a new guy here too) you need to plug in the gryphon into your truck to get the hex code, but you only need it if you are going to have Bill do a custom tune for your truck. You can use the gryphon without custom tunes(im doing that now til i can get some more $$) without any damage to the truck versus using stock tunes. For the version you downloaded i dont know why that wouldnt be the best version to use, so I assume you are fine with using that. I would for sure call PHP for any other questions, they are really great at answering phones now 
|
|
#2
Tue, May 25th, 2010, 10:40 PM
|
||||
|
||||
|
Go ahead and apply any updates for pegasus and then do the gryphon updates. After that it will be safe to plug the programmer into your truck. One of the first screens that come up will have your hex code. Go ahead and write that down. Also fill out your user cp. You do not NEED to have the hex code unless you plan on ordering custom tunes.
__________________
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
