Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old Fri, June 25th, 2010, 08:58 AM
BigSur BigSur is offline
Scientist
 
Join Date: Feb 2010
Location: Hampton, VA
Posts: 109
BigSur will become famous soon enoughBigSur will become famous soon enough
Default

Quote:
Originally Posted by 88Racing View Post
What have been your ambient temps?>>Or what's the weather like in the area you've been driving in?

For example the last few times the garage queen has been out, its been mid 70s to lower 80s. Driving her at approximately 80 mph with varying elevation of 500ft. The tft average was 154 over a 60 mile trip.
My CHT was 208-210.

The comm gear pid is the one to view for tc lockup.
It will show what gear your tranny is using and a paddlelock as a symbol for the torque convertor lockup.
THanks 88!!! Ambient temps where I'm at have been in the 90's to low 100s this past week. My TFT is usually around 156 but will increase to 175+ at times. If my assumption is correct....the more I think about it....the shifting seems to be an issue when the truck is really hot ONLY. I'm realizing that its amost never repeatable when the truck has been sitting. Might take some more research.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:23 AM.


All Contents Copyright 2008-2024, Power Hungry Performance