worst serves iv ever had from php

[ABLAIR07]

yup its the gryphon my trucks a 02 f150

[Longshot270]

Hmm, sounds like a cable issue. I'll try to get their attention.

For now can I get you to update your User CP?

[ABLAIR07]

it dose not do any thing cant read codes, reset to stock or anything elce an iv had to have my truck flashed twice now needs it once more if i want to go back to stock

[ABLAIR07]

no iv got ahold of them once when it first happend an they emaild me a file to fix it but with the wrong s#

[ABLAIR07]

i dont know what you mean ... user cp?

[Longshot270]

There is a link we mods use for the user cp but I can't seem to get it correct right now. To find it, scroll to the top where a blue box has your user name, last visit, private message mailbox. Just below that there is a darker blue box and on the far left is User CP.

Since you had the truck reflashed by the dealer you will need to have it unlocked. The programmer is "married" to the original stock tune from when you first programmed, which is now gone. That and a new cable should have you fixed up if the cable really is the problem.

[ABLAIR07]

my budy turned the truck on when it was program a tune in the last time . so i took it to ford they flashed it worked fine. i retuned it work good for a bit now i cant reset it to anyof the tunes says f2 missing fille

[Longshot270]

Are you sure it wasn't either a D2 error or F1 error?
If it was an F1 error then try this:
1. Leave the ignition key in the ON position.
2. Disconnect the Gryphon at the OBDII port.
3. Plug the Gryphon back into the OBDII port.
4. After getting to the main screen, wait 15 seconds for needed parameters to be loaded.

If it was a D2 error then we can almost be sure that an important part of the cable or the programmer failed.

Does the programmer light up and show the little parameters when your driving?

[ABLAIR07]

i turn it on it says unable to locate splash try to tune it comes up f2 missing file but all the gages work on it when im driving just cant scan it for tbl codes or change any thing

[Longshot270]

Ok, this is a new one for me.

Try taking it out of the truck and updating it. If you dont already have it, download the program Pegasus from the PHP website.
Power Hungry Performance - Customer Support

Completely install pegasus before you plug the programmer in.

Once you have pegasus installed and the programmer is in, go to Gryphon Update Manager and go through the steps to resetting the programmer.