Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 1988 to 1996 F-150

1988 to 1996 F-150
The earlier OBD-I F-150 including the 4.9L, 5.0L, 5.8L, and 460 engines.


Reply
 
Thread Tools Display Modes
  #1  
Old Mon, August 30th, 2010, 04:24 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Nice post, osprey!

That's some DANG GOOD INFORMATION!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote
  #2  
Old Tue, August 31st, 2010, 03:52 PM
osprey osprey is offline
Whopper
 
Join Date: Jun 2010
Location: Phoenix, AZ
Posts: 9
osprey is on a distinguished road
Default

Thank you, Cleatus, for the vote of confidence.

Other things you MIGHT want to consider on the 4.9/300, depending on your location and other factors:

180 degree thermostat- I have tried it in a long term (1 year) test, and do use one becasue of my location in Hell's Foyer (Phoenix), and the fact that I do have hills to climb going north or east of town. I did not see any significant change in fuel mileage with this change, but I did notice that the engine did not get as hot in hill climbing when the ambient air temperature was in the 100+ range.

Gearing- I FULLY believe that the 4.9/300 acts very much like a diesel, and should be geared accordingly. The engine should not be ran over 2000 RPM at cruise (1800 to 2000 RPM at cruising speed gives me the best mileage), and it should not be ran past 3000 to 3500 RPM at any time. This comes from over 100k miles on the current F150, and over 250k on a 300 in a 1955 F100. That explains why I run a 3.08:1 gear in my current truck, and ran a 3.00:1 in the '55.

The 4.9/300 is a torquey little brute, and runs like a little gas fired diesel. If properly geared, and RPM kept in its power band, it will last well over 400k miles with proper maintenance and give great MPG very reliably.
Reply With Quote
  #3  
Old Wed, September 1st, 2010, 04:50 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Or you can do like a friend of mine did and turbocharge it. Pushing well past it's mechanical limits (but surviving!!) it was able to put down 300 RWHP before 3500 RPM. That's 575 ft. lbs. at the rear wheels! He quit running 18 PSI of boost (stock bottom end) after that run.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:20 PM.


All Contents Copyright 2008-2024, Power Hungry Performance