Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Tue, August 31st, 2010, 12:31 PM
RobbyMartin RobbyMartin is offline
Bacon King
 
Join Date: Sep 2009
Location: Yucaipa, CA
Posts: 69
RobbyMartin is on a distinguished road
Default

Quote:
Originally Posted by JackandJanet View Post
Yes - Something IS wrong. The base (stock) tune in your PCM does not "see" your truck properly. Unless Bill wrote a new "stock" tune for you, I cannot see how his "tune" files would have anything to do with this.

How did you get your truck to run in the first place after the engine swap before Bill entered the picture? I may be wrong,. but I'd guess that someone "flashed" a stock tune into that PCM that made it work with the new engine. Then, Bill wrote custom tunes for that flash (hex code).

My "educated" guess is, the stock flash DID NOT include your ABS brakes. So, I'd bet you need a new stock flash. Once you get this, I suspect Bill will have to rewrite your tunes - similar to getting a dealer reflash.

If what I'm saying is plausible, go back to whoever did your stock flash and make him reflash it with the CORRECT stock tune. Make sure you set your truck back to stock first though!

- Jack
Jack, you yourself suggested in an earlier response that the stock flash did not include the ABS brakes in the tune. I want to make sure that Bill's tune included the ABS brakes before I start spending a lot of money trying to figure out something that may be as easy as checking a stock tune.
  #2  
Old Tue, August 31st, 2010, 03:07 PM
RobbyMartin RobbyMartin is offline
Bacon King
 
Join Date: Sep 2009
Location: Yucaipa, CA
Posts: 69
RobbyMartin is on a distinguished road
Default

Today, I was on an empty street and decided to test the brakes and they locked up everytime I was firm with them. This is bad and is a serious issue in regards to safety.

Please get Bill's attention on this and if everything is good with his tune then I'll start spending money to get this resolved, but I am not spending money to get someone else to mess with my stock tune if that's the issue.
  #3  
Old Tue, August 31st, 2010, 05:40 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

I'll leave a post on the mod board about the issue. For now just be careful until this gets ironed out.
__________________
  #4  
Old Tue, August 31st, 2010, 06:29 PM
RobbyMartin RobbyMartin is offline
Bacon King
 
Join Date: Sep 2009
Location: Yucaipa, CA
Posts: 69
RobbyMartin is on a distinguished road
Default

Quote:
Originally Posted by Longshot270 View Post
I'll leave a post on the mod board about the issue. For now just be careful until this gets ironed out.
After my two close calls, I am very careful.
  #5  
Old Tue, September 14th, 2010, 10:14 AM
RobbyMartin RobbyMartin is offline
Bacon King
 
Join Date: Sep 2009
Location: Yucaipa, CA
Posts: 69
RobbyMartin is on a distinguished road
Default

OK guys, I've waited long enough to see if Bill's rewrite of the original stock tune included the ABS. I think it's ridiculous to have to wait this long, especially with a safety issue of my brakes locking up as much as they have. I need Bill to recheck his file and I shouldn't have to be put on the back burner any longer.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:14 AM.


All Contents Copyright 2008-2024, Power Hungry Performance