Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 2009 to 2014 F-150

2009 to 2014 F-150
3.5L, 3.7L, 4.6L, 5.0L, 5.4L, and 6.2L equipped F-150s.


Reply
 
Thread Tools Display Modes
  #1  
Old Mon, September 6th, 2010, 11:19 AM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

Oh there has been many people that has been interested. Just nobody that is a honest person either they give me talk that they have sent a check and it never gets here or the check is a fraud check.. Its scary what some people will do for a quick buck these days. Ive just given up all hope on tring to sell things online.
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
  #2  
Old Mon, September 6th, 2010, 11:22 AM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Do you have a paypal account or something? I've used it a few times and it seems to work pretty well.
__________________
Reply With Quote
  #3  
Old Mon, September 6th, 2010, 11:50 AM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

nope dont have one.
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
  #4  
Old Tue, September 7th, 2010, 09:37 PM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

Well i got the email back from dynatech and they said they arent sure if they will fit my truck they offered to let me be the test dummy i guess you can say but im a little if-fy on that. does anybody have the pacesetters longtube headers on their truck if so how do you like them and have they been a hastle.
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
  #5  
Old Fri, September 10th, 2010, 10:23 PM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

would it be ok to have the headers and exhaust and hood put on with the custom tunes that i have now, or would that be a bad idea. I want to get all of it done before it starts getting cold. Would it be best to run my truck stock while these mods are added until my new tunes are done.

for the new tunes just to be clear would i just fill out a form like i orginally did and just add the mods unto it. And state that i need the tunes redone.

thanks,
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
  #6  
Old Fri, September 10th, 2010, 10:48 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

This is just my opinion: Unless you have a pretty good idea of what a mod is going to do FOR you and what the possible drawbacks are (and how easy it is to "reverse"), I don't think I'd try it.

I know, how does this "square" with getting a "tuned" truck from PHP? Well, for me, it was:
1. I hated the way the truck nosedived when I wanted to pass someone.
2. I thought it SHOULD get better gas mileage than it was getting.
3. Several people had made posts saying the Edge programmer made all the difference.
4. I had read MANY posts from Bill in f150Online and then I TALKED to him. (And our talks covered things other than "tuning".) This lead me to TRUST him!
5. Finally, I knew I could "reverse" things immediately if I didn't like the result and I'd only be out $400.00 (approx). (Sometimes, you just take a "chance" - its only money!)
So anyway, this was the "soul searching" I went through before buying an Edge that later got converted to a Gryphon. I've never regretted the move.

So, how do you feel about Dynatech? Do they seem like "upfront" people? Are they warning you about possible damage to your truck? Do they seem to be in there helping other people using their products? If you don't have a "good" feel about this, don't go there.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
Reply With Quote
  #7  
Old Fri, September 10th, 2010, 11:13 PM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

I completely see what your saying....

I probably should of mentioned that im not letting dynatech use me as their lab mouse. I found that Stainless Works makes a set for my truck. I have been emailing them back and forth today about their kit and they tell me that it definitely will work for my truck. There are a bunch of long tube header kits for the 09-up f150 for 2wheel drive and not 4wheel drive(which I have).

But you are right I realize im taking a chance but I guess im stubborn I put mod after mod on my other truck(mainly cheap things) I guess i got addicted to it. I knew what mods i liked and got them for this truck,except for the gryphon thats new to me. Im pretty much done after this as far as major performance goes, not a whole lot left to do except a supercharger. all i know for sure i want to do is but a lift kit on it (dont know if i want a 4 or 6 inch lift)

Like you said its only money and you only live once! might as well make the most out of it and have some fun in the process.
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
  #8  
Old Fri, September 17th, 2010, 08:24 PM
martinoledad's Avatar
martinoledad martinoledad is offline
Triple Whopper with Cheese
 
Join Date: Dec 2009
Location: Clearfield, KY
Posts: 218
martinoledad is on a distinguished road
Default

Really excited. I got my hood ordered yesterday They said that should take between 3-4 weeks to come in. Also ordered the stainless works longtube header kit today and that should be here with in the week also ordered my new tunes that should be here the same time as the hood.

I havent seen a email about my custom tunes. Corey or bill(just know it was a guy) at PHP told me the other day that they recieved it(earlier monday or tuesday) but still havent recieved an in-voice

but he also suggested i go back to stock until my new tunes do come in im going to miss the tunes but should be worth it when its all said and done.
__________________

40 series Flowmasters, K@N CAI, Jet MAF, Troyer Under Drive Pulleys, Stainless Works Longtube headers/Hi Flow CATS w/X-pipe, Ram Air Hood G-Force, SCT X3 programmer with custom tunes
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:24 AM.


All Contents Copyright 2008-2024, Power Hungry Performance