What engine you tuning?

[Buckeyes903]

Originally Posted by Chris74

Now that my truck is nicely broken in.........I can run that (or better) on stock tune!

What is broken in? My 08' just got to 20k, is it safe to assume that is broken in?

Originally Posted by ccoll5

I haven't gotten mine yet, should be here tomorrow , but I plan on checking the difference in the times from stock to canned tunes then once my custom tunes come in checking again. Yeah, these trucks are quite a bit faster than people make them out to be. Especially when you go from a 2.3L Ranger to the 5.4L F-150 lol.

Haha, yeah I'm in the same boat, I went from a 94 2.3 ranger with 33's to the 4.6 F-150, feels like a rocket ship to me

[ccoll5]

I drove the Ranger to work yesterday because the F-150 was at the shop getting an exhaust system put on (Flowmaster 40 series SI/DO), and I felt like the Ranger was working really hard to drive 60-65 mph, feels a lot different lol.

[Buckeyes903]

Originally Posted by ccoll5

I drove the Ranger to work yesterday because the F-150 was at the shop getting an exhaust system put on (Flowmaster 40 series SI/DO), and I felt like the Ranger was working really hard to drive 60-65 mph, feels a lot different lol.

Yeah I drove mine the other day and it felt sooo slow, and with it being a stick was funny to drive again. I think the top speed on my Ranger was 80 downhill haha

[4.6 Punisher]

Just 2 more days and I can finally place my order for the Gryphon. Seriously can't wait.

[Circuit]

Best 0-60 as of right now is 9.12 on Gryphon stock level 2 but I can't find a place to do it without getting major wheel spin which makes my foot let up a bit without me thinking.

Once I get as much of this 87 octane out I'll be filling it up with 94 and setting it to level 3... then I might have to buy some new tires...

Oh and the belt chirp is awesome at wot when shifting. I have never owned a vehicle that was as fast as this thing is now. I forgot I had a V8 under the hood. I used to have a 1976 Chev C20 with a 350 and my little 281 Windsor out does it hands down now.

[bustintheirazz]

I checked mine, I am getting 7.63 for my 0-60. Im running a custom level 2 and have 33" Load range E. Does anyone know how to convert your tire size to the (mm) on the gryphon? When I do my conversion of 33" to mm I get 838.2mm. Something that I am missing?

[Jackpine]

Originally Posted by bustintheirazz

I checked mine, I am getting 7.63 for my 0-60. Im running a custom level 2 and have 33" Load range E. Does anyone know how to convert your tire size to the (mm) on the gryphon? When I do my conversion of 33" to mm I get 838.2mm. Something that I am missing?

Sure - the 838.2 is your tire's diameter in millimeters. You need the circumference, so multiply that by pi, which gives you 2633.3 mm. But then, deduct some for "squish" (often about 3%) so multiply by 0.97 and you'll have 2554 mm, which is the size I'd try.

- Jack

[Chris74]

Originally Posted by Buckeyes903

What is broken in? My 08' just got to 20k, is it safe to assume that is broken in?

Yup....... My truck became noticeably more lively starting about 15k or so.....(even on stock tune)!

[MercedesTech]

Another 4.6 guy over here.

My 0-60 is closer to 10 seconds I think !

Also on a 6" lift, and running 3.73 gears, true 35" tires load range E (heavy SOB's !) 18" rims, and no real power mods yet. Too many other projects going on right now.

If its dry when I get home, might hop in the truck to see what I can get. Been awhile.

[Desert Racer]

5.4 in mine and did a 0-60 run got a 8.6X with 35's and 3.73 gearing yet the tire size was set at 23XX which is wrong so it should be better.