|
|
|||||||
| 2003 to 2007 6.0L Power Stroke Diesel 6.0L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, November 30th, 2010, 09:29 AM
|
||||
|
||||
Since the truck was rolled back, it should be using the EBP again. Have you checked the EBP sensor, they were famous of failing or pluging up, and giving the truck low power issues.
just a thought 
|
|
#2
Wed, December 1st, 2010, 12:09 AM
|
||||
|
||||
|
Good thought. I remember now that I have read about the EBP sensor being used with the rollback, now that you mention it. I also came across some information about a VGT relearn being necessary after a ECM flash on the earlier 6.0s. Most of the posts I've found about that seem to be from 2007-ish. Any truth to that?
__________________
Thomas H. '97 F-250 CCSB 7.3L Auto, Gauges, Modded H2E, 285/200% sticks, 7.3L IC, Stealth Dual HPOP, Pheonix chip '03 F-250 CCSB 6.0L Auto, Gryphon CTS, FICM tuning by PHP, Powermax
|
|
#3
Wed, December 1st, 2010, 09:26 PM
|
||||
|
||||
|
The VGT re-learn from what I remember is for the 03-04's that were flashed to ignore the EBP. 2007 is probably about the time that the non-ebp flashes came out, so your probably right.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
