![]() |
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
No dice. Truck still throws the same p061b error.
Maybe a new poll for how many times people have thrown their truck into limp mode...I'm somewhere in the 20's now. With the Edge it was the p061f, now it's the p061b with the Gryphon. It's always the same scenario. Getting on the throttle off the line, truck lurches forward and bang, truck throws error and goes into limp mode. FRUSTRATED!
|
|
#2
|
||||
|
||||
|
Hey, what's up man? Besides the code.
My custom tunes took care of my code issues so since you now have a custom tune, I don't really know what to tell you. Call Bill and see what he has to say. Did you do the battery reset and still get the code? FWIW my hex code is OKDG3A4.HEX I feel for you though, limp mode is retarded. My limp mode count is probably at least 15.
__________________
|
|
#3
|
||||
|
||||
|
Yeah I kinda figured my next step was to call the man himself. I did try the sensor reset by unplugging the battery, headlights on, etc, etc...threw the error this morning in rush hour traffic. I had a few choice words thrown my way, was told I was numero uno by a finger gesture or 2 and did a bit of
myself.I was close on the hex code, mine's 0KDG3AB. Wonder what that last character is... Anyway, if the mods don't have any further ideas, or with their recommendation, I figure I'll have to hit Bill up and get the lowdown before I see how far I can punt this programmer for distance... |
|
#4
|
||||
|
||||
|
How come you have a letter for the last digit while I have a number? Maybe that B is why you keep getting that code.
__________________
|
|
#5
|
||||
|
||||
|
Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|