Hitting Rev Limiter

[Blowby]

Originally Posted by 907DAVE

WOT shifting is set for 3400 rpm, fuel limit should not really come in till around 3600ish.

I cannot find anything labeled "RPM Anticipated shifts", I did find RPM Maximum to Predict Upshifts - which is set to 1000 RPM.

The over run will increase as power increases, with Stage II's shoot for about -350/400 rpm from your actual target RPM. Also rev limiter will go the other way so add rpm to your target point. If you want 3600 input 3900 or so..... hope this helps.