![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Whenever you have time I would love to know what you meant by this. Especially since I have an '03. Should I be concerned or pay special attention to anything?
__________________
|
#2
|
||||
|
||||
![]() Quote:
The valve body spacer on the 02 and 03 trucks is different than the one on earlier trucks so it's easy to get a long, drawn-out shift on higher horsepower programs due to restricted flow problems. Sometimes, you'll get a flare and a bump too.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#3
|
||||
|
||||
![]() Quote:
Could this cause longevity problems with the higher hp tunes and is there something I could do to improve it? Also thanks for the time and info you’re sharing. I really appreciate it.
__________________
|
#4
|
||||
|
||||
![]()
I've had a hectic couple of weeks but did receive my chip. Almost a week later I finally got around to installing it. Only went for a short drive but WOW! The 80hp DD adds a nice bit of pep and the 120hp race is scary. It's such a drastic increase I don't trust the tranny to hold up to it. I was honestly afraid to go WOT on it, especially through the shifts.
Definitely happy with the tunes but might need some time to build my confidence in the truck.
__________________
|
#5
|
|||
|
|||
![]()
I hear you, it's gonna take a while to wear the NEW off of it...lol
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt, |
![]() |
Thread Tools | |
Display Modes | |
|
|