Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
Reload this Page Trans shift points, pressures
Register FAQ Calendar Mark Forums Read

F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here.

 
 
Thread Tools Display Modes
  #1  
Old Tue, July 19th, 2011, 11:56 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
  
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,271
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default
Definitely our pleasure.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
  #2  
Old Wed, July 27th, 2011, 09:08 PM
screagle07 screagle07 is offline
Whopper
  
Join Date: Apr 2011
Location: Sheboygan Falls, WI
Posts: 15
screagle07 is on a distinguished road
Default
I re-burned my chip with the new files for the Trans-go shift modifications and have to say I like the original files better. In the higher settings, I get short shifts and a shooshing sound when it shifts into overdrive. Not sure what this is, I hope it isn't the tc slipping. I might just be paranoid since I just had my trans rebuilt too. I am going to re-burn my chip with the original files and get in touch with the guy that rebuilt my tranny to see what else he may have modified. I think he may have modified the valve body as well. I will post again after I figure out exactly what he did and what is going on with my trans. Thanks for all the help and I will let you know what I find out.
  #3  
Old Wed, July 27th, 2011, 10:28 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
The "shoosh" you're hearing is from the turbocharger. The engine RPM is dropping quicker and the drive pressure on the turbine side of the turbo goes away thus causing the boost pressure to come back out through the compressor inlet. No biggie.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:26 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance