|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#7
Sun, October 23rd, 2011, 11:44 AM
|
|||
|
|||
Assuming the stock 6-position switch is a single pole six position switch, you could swap it out for a dual-pole six position switch which has two separate sets of six position contacts that are electrically separate. Wire up one set to the chip, the other to your LED's. The LED's will then follow the switch setting.
Personally, I want to find a six button interlocked switch where you press one of six individual buttons for the program you want, and it automatically disengages the previous switch. |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode